Feeds:
Posts
Comments

Posts Tagged ‘Window casings’

Occasionally in Toronto, one can find an original Queen Anne Style window in a Bay and Gable, or other Victorian, styled home. Apparently, improved glass making in the 1880s meant that designers could build larger windows with fewer small mullioned panes, however, mullions were still appreciated for their aesthetics.

Queen Anne window style, the result of improved glass making, was a completely new style of window that did not exist in previous historic styles.

Queen Anne style "Fancy Top" window

Queen Anne style "Fancy Top" window

At this time, public preferences and architect recommendation called for widows with divided, or “fancy top” upper windows and single full lower windows that would allow for unobstructed view while still maintaining the look of a divided window in the top pane. In different windows the divided lights march around the casement, allowing for a larger central window. The look of multiple mullions of varying coloured antique or muffle glass can be very spectacular when sun shines from behind. Due to the era, these windows were largely installed in Queen Anne houses, from which they are named, but are also called “cottage” windows. This window style, the result of emerging technology, was a completely new style of window that did not exist in previous historic styles.

Reproduced Casement Window

Reproduced Casement Window

One will need to find a good carpenter when trying to replace a Queen Anne window given the intricate mullion that comprises the panes. Luckily southern Ontario has many good carpenter that specialize in keeping alive the large Victorian housing stock in the province. Hoffmeyer Mills in Sebringville specializes in period millwork and made a perfect sash to custom specs.

Glazing stained glass lights on a Queen Anne window requires a bit of knowledge of period glass used in 1880s windows. A local stain glass supplier was very helpful in locating the perfect classic Victorian cobalt, red and amber glass that was so often matched together in Queen Anne windows of the period. While the cobalt blue, red and amber was a popular combination, Queen Anne windows were glazed using multiple coloured and textured glass that was produced at the time.

Panes pressed into glazing putty and secured with baton strips

Panes pressed into glazing putty and secured with wood stop strips

Reproduction “Antique Glass” can be purchases in varying qualities from mouth blown to machine rolled. In both cases, a glass that is dynamic and brilliant in light is produced. The high quality mouth blown glass is exceptionally brilliant given the random striations and swirls produced as the glass maker spins the glass to fabricate the panes. In many instances, other rolled textured glass, such as muffle glass, were used in these windows.

Individual panes can be either be  secured with glazing points and putty or set in a small bead of putty and secured with small wooden stops. I would recommend using the wood stops since glazing points may be hard to secure given the small pane sizes and the increased chance of breaking a pane given that reproduction antique glass is more brittle.

Installed window

Installed Queen Anne casement window

The final window was installed using four inch reproduction Victorian hinges and window hardware. A minor amount of wood planing was needed to get a snug fit in the window jam. Given that it was installed in a humid bathroom, it will eventually get a good coat of oil based paint.

Advertisements

Read Full Post »

Industrialism resulted in the wide availability of architectural millwork that was once only available to wealthy clients building the best of homes. Late Victorian or “High Victorian” millwork was the most elaborate and suited popular Victorian revival styles of the time including Queen Anne and Eastlake. Hull (2003) refers to the period 1890-1910 as the “Golden Age” of American architectural millwork. During this period wood was plentiful and cheap and there existed the right mix of artisans, craftsmen, and manufacturers that produced styles that were ornate, elaborate and expressive. According to Hull, the end of this great period of millwork followed the Depression era, when wood was no longer affordable and modern options, such as hollow core doors, became widely used, marking the end of historic millwork.

Many of the early millwork companies started off as lumber yards and success and growth was the result of industrialization and proximately to the railroad (Hull, 2003). It is probably no coincidence that my old Vic was built in 1889 by a local lumber barron whose business was located near the railway in the emerging industrial city of West Toronto Junction.

The Victorians did not consider most softwoods to be noble enough to stain and hence most pine interior trim would have been painted or artistically grained to reproduce the look of solid English oak.

Wood mouldings were produced from various hardwoods and softwoods with hardwoods, such as Oak and Mahogany, limited to the public rooms in grander homes. Characteristic of Victorian domestic culture, there was a strong demarcation between public rooms, that received the most ornate moulding, and the private spaces of the house that received more modest treatment (Webb, 2002). The ornate, thick and deeply milled door and window casings made mitre work more challenging for carpenters. Corner blocks, while seen as added ornamentation to contemporary eyes, were used to increase the efficiency of building wood casings and avoided highly precise mitre work (Webb, 2002).

The Victorians did not consider most softwoods to be noble enough to stain and hence most pine interior trim would have been painted or artistically grained to reproduce the look of solid English oak. Frequently the original painted graining is preserved under subsequent layers of paint. Patient restorationists can use methyl hydrate on a cloth to rub down to the original painted grain that is protected with shellac (Nigel, 1997).

Hull, Brent. (2003). Historic Millwork: A Guide to Restoring and Re-creating Doors, Windows, and Moldings of the Late Nineteenth Through Mid-Twentieth Centuries. Wiley.

Hutchins, Nigel. (1997). Restoring Old Houses. Firefly Books.

Webb, Kit. (2002). The Victorian House. London: Aurem Press.

Read Full Post »